Description

1, The basic components of the drive module body placement, highly integrated, well-designed board layout, very beautiful, very small, onboard two-way high-power DC motor drive, the drive module size of only 82mm * 70mm; 2, Large heat sink at high currents can effectively drive module for cooling, maintain good and stable performance of the module; 3, When the drive motor, the module maximum rated current up to 100A, and conduction only 0.0015 ohm resistor; 4, The switching frequency is high, the most up to 60KHZ, thus effectively avoiding the low frequency of commissioning motor brings unpleasant; 5, The control interface is very simple: A1.A2 = 0.0 when the brakes; when A1.A2 = 1.0 for forward; A1.A2 = 0.1 when reversing; PA for PWM wave input (motor speed adjustment); G for the Dashboard common ground pin (B road for the same control); 6, 3.3V and 5V MCU can control this module, and only need the way the motor power (12V ~ 48V); Driver module mechanical parameters: 1)lenth width high= 80 mm * 70 mm * 25 mm; 2) distribution of the four positioning hole 3 mm, the distance is 74 mm * 62 mm; Package Contents 1 x100A High Power Dual Channel H-bridge DC Motor Driver Module